Product ID:EA 9313 PART B
MSDS Date:09/29/1989
FSC:8040
NIIN:01-107-4000
Kit Part:Y
MSDS Number: BJYBK

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 415-687-4201

Cage: 33564

Telephone: 202-483-7616

Cage: 33564

ALKYLAMINES

VOC <10 G/L ESTIMATE

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MATERIAL MAY BE CORROSIVE OR CAUSE
SEVERE BURNS TO SKIN AND EYES. HIGH CONCENTRATION OF VAPORS CAN
CAUSE SEVERE IRRITATION OF EYES AND RESPIRATORY TRACT. LIQUID
CAUSES SEVERE DAMAGE TO MUCOUS MEMBRANE S IF SWALLOWED. PROLONGED
AND REPEATED CONTACT MAY CAUSE SENSITIZATION WHICH WILL RESULT IN
ALLERGIC REACTIONS.
Effects of Overexposure:POSSIBLE BURNS TO EYES AND SKIN; IRRITATION AND
POSSIBLE SENSITIZATION TO SKIN. VAPORS MAY BE IRRITATING TO UPPER
RESPIRATORY TRACT. DO NOT GET ON SKIN OR CLOTHING.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH
THOROUGHLY WITH SOAP AND WATER OR HAND CLEANER. DO NOT USE
SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PERSISTS, SEE PHY SICIAN.

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 DEG. F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. USE ONLY IN WELL
VENTILATED AREAS.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
AVOID MIXING RESIN AND CURING AGENT IN BATCHES GREATER THAN 1 POUND
TOTAL. DO NOT HEAT MIXED ADHESIVE UNLESS CURING SURFACES TO BE
BONDED. FAILURE TO OBSERVE CAUTION MAY RESULT IN EXCESSIVE HEAT
BUILD -UP W/RELEASE OF TOXIC GASES. PART B CONTAINS ALKYLAMINES. DO
NOT HANDLE OR USE UNTIL MSDS HAS BEEN READ & UNDERSTOOD.

Vapor Density:8.45
Spec Gravity:1.02
Evaporation Rate & Reference:NIL
Appearance and Odor:REDDISH-ORANGE LIQUID WITH AMMONIACAL ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.